Original file

Audi S6 Bosch MED17.1.1 4G0906014C / 4H0906014

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S6, hardware number 4G0906014C and software number 4H0906014, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S64.0 petrol · 450.0PS / 331.0kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4G0906014C
Software number
4H0906014
Bosch part / software
10SW005552

Technical data

Vehicle
BrandAudi
Car modelS6
Engine4.0 petrol
Power450.0PS / 331.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906014C
Software number4H0906014
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7ea5cc233afbb84c
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW005552Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE578
Software / calibration4G0906014C · version 0005Offset in the file: 0x3DE592
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906014C and software number 4H0906014. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S7Flash2,048.00 KB€15Add to cart
Audi S6Flash4,096.00 KB€15Add to cart
Audi S6Flash4,096.00 KB€15Add to cart

All reads of 4G0906014C / 4H0906014

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906014C10SW005552Audi S6, Audi pcmflash
4G0906014C10SW014517Audi S6, Audi pcmflash
4G0906014C10SW051677Audi S7
4G0906014C4G0906014CAudi S6 BR PERFORMANCE, Audi S6, Audi C7
4G0906014D014522Audi A6 4.0 TFSI
4G0906014D1037551121Audi S6 4.0 V8 TFSI Quattro, Audi S7 4.0 TFSI V8, Audi S7
4G0906014D10SW014522Audi pcmflash, Audi S6, Audi S7
4G0906014D4G0906014DAudi S6

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page