Original file

Audi S6 Bosch MED17.1.1 4G0906014D / 10SW014522

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S6, hardware number 4G0906014D and software number 10SW014522, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S64.0 petrol 450PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4G0906014D
Software number
10SW014522
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS6
Engine4.0 petrol 450PS
Power450.0PS / 331.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906014D
Software number10SW014522
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7d2588fce626c888
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW014522Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2AC
Software / calibration4G0906014D · version 0002Offset in the file: 0x3DE2C6
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_040/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906014D and software number 10SW014522. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S7Flash4,096.00 KB€15Add to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4G0906014D / 10SW014522

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906014C4G0906014CAudi S6 BR PERFORMANCE, Audi S6, Audi C7
4G0906014C4H0906014Audi S6, Audi S7
4G0906014D014522Audi A6 4.0 TFSI
4G0906014D1037551121Audi S6 4.0 V8 TFSI Quattro, Audi S7 4.0 TFSI V8, Audi S7
4G0906014D4G0906014DAudi S6
4G0906014E012626Audi S6 4.0 TFSI, Audi S7 4.0 V8 32v TFSI Quattro - 420PS
4G0906014E1037534099Audi S6
4G0906014E1037537947Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page