Original file

Audi pcmflash Bosch MED17.1.1 4G0906014E / 1037544347

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi pcmflash, hardware number 4G0906014E and software number 1037544347, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash4.0 petrol 420PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0906014E
Software number
1037544347
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine4.0 petrol 420PS
Power420.1PS / 309.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906014E
Software number1037544347
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb4ccc89dec61eb5a
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software1037544347Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3D378C
Software / calibration4G0906014E · version 0004Offset in the file: 0x3D37A6
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A05C000_MY14D2/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906014E and software number 1037544347. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S6Flash4,096.00 KB€15Add to cart

All reads of 4G0906014E / 1037544347

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906014D4G0906014DAudi S6
4G0906014E012626Audi S6 4.0 TFSI, Audi S7 4.0 V8 32v TFSI Quattro - 420PS
4G0906014E1037534099Audi S6
4G0906014E1037537947Audi pcmflash
4G0906014E1037553637Audi pcmflash
4G0906014E10SW012626Audi pcmflash, Audi S7
4G0906014F1037533983Audi pcmflash, Audi S6
4G09065601037537951Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page