Original file

Audi S7 Bosch MED17.1.1 4G0906014E / 10SW012626

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S7, hardware number 4G0906014E and software number 10SW012626, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S74.0 petrol 420PS
Control unit
Bosch MED17.1.1
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4G0906014E
Software number
10SW012626
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS7
Engine4.0 petrol 420PS
Power420.0PS / 308.9kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906014E
Software number10SW012626
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2e7922e4f74325a5
Identification read from the file
ECU nameMED17.1.1
Read typeCalibration only (data set)
Bosch part / software10SW012626Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3D34C8
Software / calibration4G0906014E · version 0006Offset in the file: 0x3D34E2
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY14D2_030/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906014E and software number 10SW012626. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4G0906014E / 10SW012626

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906014E1037534099Audi S6
4G0906014E1037537947Audi pcmflash
4G0906014E1037544347Audi pcmflash, Audi S6
4G0906014E1037553637Audi pcmflash
4G0906014F1037533983Audi pcmflash, Audi S6
4G09065601037537951Audi pcmflash
4G09065601037544378Audi pcmflash
4G09065604H0906014Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page