Original file

Audi S6 Bosch MED17.1.1 4G0906560B / 10SW014038

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S6, hardware number 4G0906560B and software number 10SW014038, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S64.0 petrol · 560.2PS / 412.0kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4G0906560B
Software number
10SW014038
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS6
Engine4.0 petrol
Power560.2PS / 412.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906560B
Software number10SW014038
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi S6 4.0 TFSI
File key369fbe0662b62b2f
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW014038Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3D34F0
Software / calibration4G0906560B · version 0008Offset in the file: 0x3D350A
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY14D3_030/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906560B and software number 10SW014038. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4G0906560B / 10SW014038

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906560B1037540430Audi pcmflash, Audi RS7, Audi S6
4G0906560B1037544800Audi RS7, Audi pcmflash, Audi S6
4G0906560B1037547423Audi RS7
4G0906560B1037553639Audi A6 4.0 TFSI, Audi pcmflash, Audi S6
4G0906560B4H0906014Audi RS7
4G0906560C1037547188Audi RS6, Audi RS7, Audi RS7 Sportback 4.0 V8 TFSI quattro
4G0906560D1037551124Audi RS7
4G0906560F004273Audi RS6 4.0 TFSI V8, Audi A6 Allroad Quattro 4.0, Audi RS7 Sportback Performance 4.0 V8 TFSI quattro 8AT - 605hp

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page