Original file

Audi RS6 Bosch MED17.1.1 4G0906560F / 10SW013988

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi RS6, hardware number 4G0906560F and software number 10SW013988, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS64.0 petrol 605PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4G0906560F
Software number
10SW013988
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelRS6
Engine4.0 petrol 605PS
Power605.0PS / 445.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906560F
Software number10SW013988
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9b4e3f6ad8dab894
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW013988Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2AC
Software / calibration4G0906560F · version 0003Offset in the file: 0x3DE2C6
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_040/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906560F and software number 10SW013988. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS6Flash4,096.00 KB€15Add to cart
AudiFlash4,096.00 KB€15Add to cart
Audi RS6Flash4,096.00 KB€15Add to cart
Audi RS6Flash6,144.00 KB€15Add to cart

All reads of 4G0906560F / 10SW013988

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906560F1037544378Audi RS6
4G0906560F1037547188Audi RS6
4G0906560F10SW004273Audi RS6, Audi ticketttt
4G0906560F10SW012627Audi RS6 Performance
4G0906560F10SW051719Audi RS6, Audi C7
4G0906560F4G0906560FAudi RS6, Audi RS6 Performance, Audi RS6 RG-RACING !
4G0906560F4H0906014Audi RS6, Audi pcmflash, Audi RS6 Performance
4G0906560G10SW013991Audi pcmflash, Audi S6

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page