Original file

Audi RS6 Bosch MED17.1.1 4G0906560F / 4H0906014

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi RS6, hardware number 4G0906560F and software number 4H0906014, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS64.0 petrol 560PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0906560F
Software number
4H0906014
Bosch part / software
10SW051719

Technical data

Vehicle
BrandAudi
Car modelRS6
Engine4.0 petrol 560PS
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4G0906560F
Software number4H0906014
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye7bf7d063f8e8419
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW051719Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2D4
Software / calibration4G0906560F · version 0005Offset in the file: 0x3DE2EE
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_050/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0906560F and software number 4H0906014. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS6Flash4,096.00 KB€15Add to cart
Audi RS6Flash4,096.00 KB€15Add to cart
AudiFlash4,096.00 KB€15Add to cart
Audi RS6 PerformanceFlash4,096.00 KB€15Add to cart
Audi RS6Flash2,048.00 KB€15Add to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4G0906560F / 4H0906014

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0906560F10SW012627Audi RS6 Performance
4G0906560F10SW013988Audi RS6
4G0906560F10SW051719Audi RS6, Audi C7
4G0906560F4G0906560FAudi RS6, Audi RS6 Performance, Audi RS6 RG-RACING !
4G0906560G10SW013991Audi pcmflash, Audi S6
4G0906560G4H0906014Audi RS7
4G0907115D1037524908Audi pcmflash
4G0927158BLAudi RS6

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page