Original file

Audi A8 4.0 TFSI Bosch MED17.1.1 4H0906014 / 012182

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8 4.0 TFSI, hardware number 4H0906014 and software number 012182, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A8 4.0 TFSI4.0 petrol 420.1PS / 309.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0906014
Software number
012182
Bosch part / software
10SW012182

Technical data

Vehicle
BrandAudi
Car modelA8 4.0 TFSI
Engine4.0 petrol 420.1PS / 309.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014
Software number012182
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycf512174a25c8347
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW012182Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CF970
Software / calibration4H0906014 · version 0008Offset in the file: 0x3CF98A
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6_060/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014 and software number 012182. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4G0907115D1037524908Audi pcmflash
4G0927158BLAudi RS6
4H0906014005872Audi S6 4.0 V8 TFSI Quattro - 420hp
4H0906014012157Audi S8 4.0 TFSI
4H0906014012535Audi S6 4.0 TFSI, Audi S7 4.0 V8 32v TFSI Quattro - 420PS, Audi S6 4.0
4H0906014037669Audi RS6 4.0 TFSI V8
4H09060141037515397Audi S8 4.0 TFSI, Audi S8
4H09060141037521158Audi S8 4.0 TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page