Original file

Audi Bosch MED17.1.1 4H0906014 / 1037525905

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi, hardware number 4H0906014 and software number 1037525905, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi4.0 petrol · 520.7PS / 383.0kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4H0906014
Software number
1037525905
Bosch part / software
10SW012157
Software / calibration
4H0907557

Technical data

Vehicle
BrandAudi
Engine4.0 petrol
Power520.7PS / 383.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014
Software number1037525905
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyac55fbfce2ba569c
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW012157Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CF970
Software / calibration4H0907557 · version 0010Offset in the file: 0x3CF98A
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6_060/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014 and software number 1037525905. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS6Flash4,096.00 KB€15Add to cart
Audi S6Flash4,096.00 KB€15Add to cart
Audi RS6Flash4,096.00 KB€15Add to cart

All reads of 4H0906014 / 1037525905

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H09060141037521158Audi S8 4.0 TFSI
4H09060141037521216Audi S6
4H09060141037525676Audi S6, Audi S7, Audi A6 4.0 TFSI
4H09060141037525680Audi S8, Audi S8 4.0 TFSI, Audi S8 4.0 V8 32v TFSI - 520hp
4H09060141037526471Audi S8 4.0
4H09060141037526676Audi RS6
4H09060141037528031Audi S6
4H09060141037529968Audi A8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page