Original file

Audi S6 Bosch MED17.1.1 4H0906014 / 1037537954

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S6, hardware number 4H0906014 and software number 1037537954, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S64.0 petrol · 420.0PS / 308.9kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4H0906014
Software number
1037537954
Software / calibration
4G0906014

Technical data

Vehicle
BrandAudi
Car modelS6
Engine4.0 petrol
Power420.0PS / 308.9kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014
Software number1037537954
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb4e20f10adb8f235
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software1037537954Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CF984
Software / calibration4G0906014 · version 0009Offset in the file: 0x3CF99E
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014 and software number 1037537954. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S8Flash4,096.00 KB€15Add to cart
Audi S6Flash4,096.00 KB€15Add to cart
Audi S6Flash2,048.00 KB€15Add to cart
Audi S6Flash4,096.00 KB€15Add to cart
Audi S7 4.0 TFSI V8Flash8,192.00 KB€15Add to cart
AudiFlash4,096.00 KB€15Add to cart
Audi S7 4.0 TFSIFlash4,096.00 KB€15Add to cart
Audi S6 4.0 TFSIFlash4,096.00 KB€15Add to cart

All reads of 4H0906014 / 1037537954

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H09060141037537947Audi S6
4H09060141037537948Audi A8, Audi A8 4.0 TFSI
4H09060141037537951Audi RS6, Audi RS6 4.0 TFSI V8, Audi RS7 4.0 TFSI
4H09060141037537952Audi S8, Audi S8 4.0 TFSI V8, Audi S8 4.0 TFSI
4H09060141037537984Audi A8
4H09060141037540321Audi A8
4H09060141037540563Audi A8 4.0 TFSI, Audi S6 4.0TFSI
4H09060141037540601Audi S6

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page