Original file

Audi A8 Bosch MED17.1.1 4H0906014 / 10SW007721

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8, hardware number 4H0906014 and software number 10SW007721, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.0 petrol
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4H0906014
Software number
10SW007721
Software / calibration
4H0907557C

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.0 petrol
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014
Software number10SW007721
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A8 4.0 TFSI
File keyaf5622de9ddb9ea3
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW007721Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE578
Software / calibration4H0907557C · version 0005Offset in the file: 0x3DE592
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014 and software number 10SW007721. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H09060141037546819Audi A8
4H09060141037552589Audi A8
4H09060141037553637Audi S6
4H090601410SW005872Audi S6 4.0 TFSI, Audi RS6, Audi S6
4H090601410SW007725Audi A8
4H090601410SW012156Audi A8
4H090601410SW012157Audi S8
4H090601410SW012182Audi A8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page