Original file

Audi Bosch MED17.1.1 4H0906014 / 10SW037669

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi, hardware number 4H0906014 and software number 10SW037669, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi4.0 petrol 560PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0906014
Software number
10SW037669
Software / calibration
4G0906560

Technical data

Vehicle
BrandAudi
Engine4.0 petrol 560PS
Power560.2PS / 412.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014
Software number10SW037669
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2e627b8577c00e60
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW037669Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3D3520
Software / calibration4G0906560 · version 0013Offset in the file: 0x3D353A
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY14D3_040/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014 and software number 10SW037669. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H090601410SW014519Audi A8
4H090601410SW014520Audi A8
4H090601410SW014524Audi A8
4H090601410SW014525Audi A8
4H09060144G0906014Audi S6
4H09060144G0906560Audi RS6, Audi RS7
4H09060144H0906014Audi RS6, Audi S6, Audi A8
4H09060144H0907557Audi S8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page