Original file

Audi pcmflash Bosch MED17.1.1 4H0906014A / 1037540932

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi pcmflash, hardware number 4H0906014A and software number 1037540932, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash4.0 petrol · 420.1PS / 309.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0906014A
Software number
1037540932
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine4.0 petrol
Power420.1PS / 309.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014A
Software number1037540932
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5795931efebb3a59
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software1037540932Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CF984
Software / calibration4H0906014A · version 0005Offset in the file: 0x3CF99E
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014A and software number 1037540932. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S6 4.0TFSIFlash · From the file name: Audi S64,096.00 KB€15Add to cart

All reads of 4H0906014A / 1037540932

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H09060144H0907557Audi S8
4H0906014A012631Audi A8 4.0 TFSI
4H0906014A1037533845Audi A8 4.0 TFSI, Audi A8
4H0906014A1037537985Audi A8 4.0 TFSI, Audi A8
4H0906014A10SW012631Audi A8
4H0906014B1037530062Audi A8 4.0 TFSI, Audi S6 4.0TFSI
4H0906014B1037533710Audi pcmflash, Audi S6 4.0TFSI
4H0906014C013158Audi A8 4.0 TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page