Original file

Audi pcmflash Bosch MED17.1.1 4H0906014B / 1037533710

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi pcmflash, hardware number 4H0906014B and software number 1037533710, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash4.0 petrol 420PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0906014B
Software number
1037533710
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine4.0 petrol 420PS
Power420.1PS / 309.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014B
Software number1037533710
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8acdeff28c0a21a5
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software1037533710Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CF984
Software / calibration4H0906014B · version 0003Offset in the file: 0x3CF99E
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014B and software number 1037533710. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S6 4.0TFSIFlash · From the file name: Audi S64,096.00 KB€15Add to cart

All reads of 4H0906014B / 1037533710

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014A1037537985Audi A8 4.0 TFSI, Audi A8
4H0906014A1037540932Audi pcmflash, Audi S6 4.0TFSI
4H0906014A10SW012631Audi A8
4H0906014B1037530062Audi A8 4.0 TFSI, Audi S6 4.0TFSI
4H0906014C013158Audi A8 4.0 TFSI
4H0906014C1037535414Audi A8 4.0 TFSI, Audi S6 4.0TFSI
4H0906014C1037542510Audi A8 4.0 TFSI, Audi S7
4H0906014C10SW013158Audi S6 4.0TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page