Original file

Audi A8 4.0 TFSI Bosch MED17.1.1 4H0906014G / 007725

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8 4.0 TFSI, hardware number 4H0906014G and software number 007725, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A8 4.0 TFSI4.0 petrol 435.1PS / 320.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0906014G
Software number
007725
Bosch part / software
10SW007725
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelA8 4.0 TFSI
Engine4.0 petrol 435.1PS / 320.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014G
Software number007725
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key43bbbe87c0e6e410
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW007725Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE578
Software / calibration4H0906014G · version 0007Offset in the file: 0x3DE592
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014G and software number 007725. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014D013159Audi A8 4.0 TFSI
4H0906014D1037535415Audi A8 4.0 TFSI, Audi S6 4.0TFSI
4H0906014D1037542788Audi A8 4.0 TFSI, Audi A8
4H0906014D10SW013159Audi S6 4.0TFSI
4H0906014G014518Audi A8 4.0 TFSI, Audi A8 4.0 TSI/TFSI
4H0906014G1037538380Audi A8
4H0906014G1037547013Audi A8, Audi A8 4.0 TFSI
4H0906014G10SW014518Audi A8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page