Original file

Audi A8 Bosch MED17.1.1 4H0906014G / 1037547013

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8, hardware number 4H0906014G and software number 1037547013, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.0 petrol 435PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4H0906014G
Software number
1037547013
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.0 petrol 435PS
Power435.0PS / 319.9kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014G
Software number1037547013
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye45629b605849cf6
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software1037547013Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3D53E0
Software / calibration4H0906014G · version 0006Offset in the file: 0x3D53FA
Internal build stringMED17 CB.05.04.00Offset in the file: 0x00EA36
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY14E1_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014G and software number 1037547013. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8 4.0 TFSIFlash4,096.00 KB€15Add to cart
Audi A8 4.0 TFSIFlash4,096.00 KB€15Add to cart
Audi A8 4.0 TFSIFlash4,096.00 KB€15Add to cart

All reads of 4H0906014G / 1037547013

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014D10SW013159Audi S6 4.0TFSI
4H0906014G007725Audi A8 4.0 TFSI
4H0906014G014518Audi A8 4.0 TFSI, Audi A8 4.0 TSI/TFSI
4H0906014G1037538380Audi A8
4H0906014G10SW014518Audi A8
4H0906014H012155Audi A8 4.0 TFSI
4H0906014H1037530076Audi S6
4H0906014H1037535416Audi A8 4.0 TFSI, Audi A8 4.0 TFSI V8 BiTurbo Quattro, Audi A8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page