Original file

Audi A8 Bosch MED17.1.1 4H0906014G / 10SW014518

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8, hardware number 4H0906014G and software number 10SW014518, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A8diesel 435PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0906014G
Software number
10SW014518
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelA8
Enginediesel 435PS
Displacement4.0
Power435.0PS / 319.9kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014G
Software number10SW014518
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd9d5ea33b159d904
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW014518Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2AC
Software / calibration4H0906014G · version 0008Offset in the file: 0x3DE2C6
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_040/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014G and software number 10SW014518. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A8Flash4,096.00 KB€15Add to cart

All reads of 4H0906014G / 10SW014518

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014G007725Audi A8 4.0 TFSI
4H0906014G014518Audi A8 4.0 TFSI, Audi A8 4.0 TSI/TFSI
4H0906014G1037538380Audi A8
4H0906014G1037547013Audi A8, Audi A8 4.0 TFSI
4H0906014H012155Audi A8 4.0 TFSI
4H0906014H1037530076Audi S6
4H0906014H1037535416Audi A8 4.0 TFSI, Audi A8 4.0 TFSI V8 BiTurbo Quattro, Audi A8
4H0906014H1037537950Audi A8 4.0 TFSI, Audi pcmflash, Audi A8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page