Original file

Audi S6 Bosch MED17.1.1 4H0906014H / 1037530076

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S6, hardware number 4H0906014H and software number 1037530076, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S64.0 petrol 420PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4H0906014H
Software number
1037530076
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS6
Engine4.0 petrol 420PS
Power420PS / 308.9kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014H
Software number1037530076
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2f6f2fa0700cd46e
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037530076Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CE710
Software / calibration4H0906014H · version 0002Offset in the file: 0x3CE72A
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014H and software number 1037530076. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014G1037538380Audi A8
4H0906014G1037547013Audi A8, Audi A8 4.0 TFSI
4H0906014G10SW014518Audi A8
4H0906014H012155Audi A8 4.0 TFSI
4H0906014H1037535416Audi A8 4.0 TFSI, Audi A8 4.0 TFSI V8 BiTurbo Quattro, Audi A8
4H0906014H1037537950Audi A8 4.0 TFSI, Audi pcmflash, Audi A8
4H0906014H1037540689Audi A8 4.0 TFSI
4H0906014H10SW012155Audi A8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page