Original file

Audi A8 Bosch MED17.1.1 4H0906014J / 1037552586

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8, hardware number 4H0906014J and software number 1037552586, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.0 petrol 435PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
4H0906014J
Software number
1037552586
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.0 petrol 435PS
Power435.1PS / 320.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014J
Software number1037552586
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya751b787775c7694
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software1037552586Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x1D5D8A
Software / calibration4H0906014J · version 0005Offset in the file: 0x1D5DA4
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY15B5_010/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014J and software number 1037552586. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8 4.0 TFSIFlash4,096.00 KB€15Add to cart

All reads of 4H0906014J / 1037552586

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014H1037540689Audi A8 4.0 TFSI
4H0906014H10SW012155Audi A8
4H0906014J014519Audi A8 4.0 TFSI
4H0906014J1037546819Audi A8 4.0 TFSI, Audi A8 D4 usa
4H0906014J4H0906014Audi A8
4H0906014K014524Audi A8 4.0 TFSI
4H0906014L014392Audi A8 4.0 TFSI
4H0906014L1037537886Audi A8 4.0 TFSI, Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page