Original file

Audi A8 4.0 TFSI Bosch MED17.1.1 4H0906014N / 014525

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8 4.0 TFSI, hardware number 4H0906014N and software number 014525, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A8 4.0 TFSI4.0 petrol 450.0PS / 331.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0906014N
Software number
014525
Bosch part / software
10SW014525
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelA8 4.0 TFSI
Engine4.0 petrol 450.0PS / 331.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0906014N
Software number014525
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye46b45a759dedbc7
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW014525Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2AC
Software / calibration4H0906014N · version 0002Offset in the file: 0x3DE2C6
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_040/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0906014N and software number 014525. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014L1037537886Audi A8 4.0 TFSI, Audi pcmflash
4H0906014L1037540321Audi A8 4.0 TFSI
4H0906014L10SW014392Audi A8
4H0906014M012156Audi A8 4.0 TFSI
4H0906014N10SW014525Volkswagen pcmflash
4H0906014N4H0906014Audi A8 DYNO CHIPTUNINGFILES
4H0907115A1037524910Audi
4H0907115B1037535791Audi

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page