Original file

Audi Bosch MED17.1.1 4H0907115B / 1037535791

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi, hardware number 4H0907115B and software number 1037535791, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.0 petrol
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4H0907115B
Software number
1037535791
Vehicle maker's hardware number
8R0907115G

Technical data

Vehicle
BrandAudi
Engine2.0 petrol
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0907115B
Software number1037535791
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi 2.0 TFSI
File key3932fefc5d7f6292
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software1037535791Offset in the file: 0x02001A
Vehicle maker's hardware number8R0907115GOffset in the file: 0x3E4316
Software / calibration4H0907115B · version 0004Offset in the file: 0x3E4330
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)52/1/MED17/5/MED17.1.1//D1711A08C000_NY13P40/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907115B and software number 1037535791. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0906014N014525Audi A8 4.0 TFSI
4H0906014N10SW014525Volkswagen pcmflash
4H0906014N4H0906014Audi A8 DYNO CHIPTUNINGFILES
4H0907115A1037524910Audi
4H09075571037521158Audi A8
4H09075571037525680Audi A8
4H09075571037531121Audi A8
4H09075571037533632Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page