Original file

Audi S8 Bosch MED17.1.1 4H0907557A / 10SW012166

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S8, hardware number 4H0907557A and software number 10SW012166, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S84.0 petrol 520PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4H0907557A
Software number
10SW012166
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS8
Engine4.0 petrol 520PS
Power520.7PS / 383.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0907557A
Software number10SW012166
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye189175a74b1d88e
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW012166Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3CF970
Software / calibration4H0907557A · version 0006Offset in the file: 0x3CF98A
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY13B6_060/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907557A and software number 10SW012166. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0907557A012166Audi S8 4.0 TFSI
4H0907557A1037533821Audi S8 4.0 TFSI, Audi S8
4H0907557A1037537984Audi S8 4.0 TFSI
4H0907557A1037541520Audi S8 4.0 TFSI, Audi S8
4H0907557B1037529968Audi S8 4.0 TFSI
4H0907557B1037533851Audi S8 4.0 TFSI, Audi S8
4H0907557CCASE
4H0907557C007721Audi S8 4.0 TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page