Original file

Audi S8 Bosch MED17.1.1 4H0907557E / 10SW012167

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S8, hardware number 4H0907557E and software number 10SW012167, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S84.0 petrol 520PS
Control unit
Bosch MED17.1.1
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4H0907557E
Software number
10SW012167
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS8
Engine4.0 petrol 520PS
Power520.7PS / 383.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0907557E
Software number10SW012167
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye1196542c6066309
Identification read from the file
ECU nameMED17.1.1
Read typeCalibration only (data set)
Bosch part / software10SW012167Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3D34C8
Software / calibration4H0907557E · version 0004Offset in the file: 0x3D34E2
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY14D2_030/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907557E and software number 10SW012167. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S8Flash4,096.00 KB€15Add to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4H0907557E / 10SW012167

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0907557D1037552589Audi S8 4.0 TFSI, Audi S8
4H0907557E012167Audi S8 4.0 TFSI
4H0907557E1037537935Audi S8 4.0 TFSI, Audi S8
4H0907557E1037540320Audi S8 4.0 TFSI, Audi S8
4H0907557E4H0906014Audi S8
4H0907557F014227Audi S8 4.0 TFSI
4H0907557F4H0906014Audi S8
4H0907557G004313Audi S8 4.0 TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page