Original file

Audi S8 4.0 TFSI Bosch MED17.1.1 4H0907557F / 014227

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S8 4.0 TFSI, hardware number 4H0907557F and software number 014227, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S8 4.0 TFSI4.0 petrol 519.4PS / 382.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0907557F
Software number
014227
Bosch part / software
10SW014227
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS8 4.0 TFSI
Engine4.0 petrol 519.4PS / 382.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0907557F
Software number014227
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya70aa04aab80ba84
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW014227Offset in the file: 0x02001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2AC
Software / calibration4H0907557F · version 0003Offset in the file: 0x3DE2C6
Bosch project identifier (EPK)55/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0_040/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907557F and software number 014227. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0907557E1037537935Audi S8 4.0 TFSI, Audi S8
4H0907557E1037540320Audi S8 4.0 TFSI, Audi S8
4H0907557E10SW012167Audi S8, Audi pcmflash
4H0907557E4H0906014Audi S8
4H0907557F4H0906014Audi S8
4H0907557G004313Audi S8 4.0 TFSI
4H0907557G007662Audi S8 4.0 TFSI, Audi S8 4.0 TFSI V8
4H0907557G013992Audi A8 4.0 TFSI V8 Biturbo Quattro

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page