Original file

Audi S8 Plus Bosch MED17.1.1 4H0907557G / 10SW004313

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi S8 Plus, hardware number 4H0907557G and software number 10SW004313, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S8 Plus4.0 petrol 605PS
Control unit
Bosch MED17.1.1
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4H0907557G
Software number
10SW004313
Vehicle maker's hardware number
4H0906014

Technical data

Vehicle
BrandAudi
Car modelS8 Plus
Engine4.0 petrol 605PS
Power605.0PS / 445.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0907557G
Software number10SW004313
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycd42ec6dec452d1d
Identification read from the file
ECU nameMED17.1.1
Read typeCalibration only (data set)
Bosch part / software10SW004313Offset in the file: 0x38001A
Vehicle maker's hardware number4H0906014Offset in the file: 0x3DE2D0
Software / calibration4H0907557G · version 0001Offset in the file: 0x3DE2EA
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A05C000_MY16B0/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907557G and software number 10SW004313. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S8Flash4,096.00 KB€15Add to cart
Audi S8Flash4,096.00 KB€15Add to cart
Audi S8Flash4,096.00 KB€15Add to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4H0907557G / 10SW004313

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0907557G004313Audi S8 4.0 TFSI
4H0907557G007662Audi S8 4.0 TFSI, Audi S8 4.0 TFSI V8
4H0907557G013992Audi A8 4.0 TFSI V8 Biturbo Quattro
4H0907557G037802Audi S8 4.0 TFSI
4H0907557G10SW007662Audi S8, Audi pcmflash
4H0907557G10SW012629Audi pcmflash, Audi S8
4H0907557G10SW013992Audi S8, Audi pcmflash
4H0907557G10SW037802Audi S8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page