Original file

Audi A8 2012y 4.2FSI Bosch MED17.1.1 4H0907560 / 1037510606

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8 2012y 4.2FSI, hardware number 4H0907560 and software number 1037510606, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A8 2012y 4.2FSI4.2 petrol
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
4H0907560
Software number
1037510606
Bosch part / software
1037525746
Software / calibration
4H0907560F

Technical data

Vehicle
BrandAudi
Car modelA8 2012y 4.2FSI
Engine4.2 petrol
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0907560
Software number1037510606
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A8 2012y
File keyac7324cf3b91dbd0
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
ProcessorTC1796
Bosch part / software1037525746Offset in the file: 0x08001A
Vehicle maker's hardware number4H0907560Offset in the file: 0x06B1EA
Software / calibration4H0907560F · version 0001Offset in the file: 0x06B204
Internal build stringMED17 CB.03.09.03Offset in the file: 0x00DBF7
Bosch project identifier (EPK)47/1/MED17/5/MED17.1.1//D171152L_MY12B0/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907560 and software number 1037510606. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0907557H014228Audi A8 4.0 TSI/TFSI, Audi S8 4.0 TFSI
4H09075601037504151Audi pcmflash, Audi A8 4.2L
4H09075601037505065Audi A8 4.2 FSI, Audi A8 4.2L
4H09075601037507953Audi A8, Audi A8 4.2 FSI, Audi pcmflash
4H09075601037513977Audi A8, Audi A8 4.2 FSI Quattro - 371hp, Audi pcmflash
4H09075601037527988Audi A8, Audi A8 4.2 FSI
4H09075601037539940Audi A8 4.2 FSI, Audi A8 4.2L
4H0907560A1037513978Audi A8 4.2 FSI V8 Quattro, Audi pcmflash, Audi A8 4.2L

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page