Original file

Audi A8 Bosch MED17.1.1 4H0907560C / 10SW010406

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A8, hardware number 4H0907560C and software number 10SW010406, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.2 petrol 371PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
4H0907560C
Software number
10SW010406
Vehicle maker's hardware number
4H0907560

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.2 petrol 371PS
Power371.2PS / 273.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4H0907560C
Software number10SW010406
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye6ba3fa5e2cec861
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW010406Offset in the file: 0x08001A
Vehicle maker's hardware number4H0907560Offset in the file: 0x06B3AA
Software / calibration4H0907560C · version 0006Offset in the file: 0x06B3C4
Internal build stringMED17 CB.03.09.03Offset in the file: 0x00DBF7
Bosch project identifier (EPK)47/1/MED17/5/MED17.1.1//D171152L_MY12C1/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907560C and software number 10SW010406. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0907560C010406Audi A8 4.2 FSI V8 Quattro
4H0907560C1037518231Audi A8 4.2 FSI, Audi A8
4H0907560C1037522243Audi A8, Audi A8 4.2 FSI
4H0907560C1037539571Audi A8, Audi A8 4.2 FSI Quattro - 371PS, Audi A8 4.2 FSI
4H0907560F010407Audi A8 4.2 FSI
4H0907560F1037525746Audi A8 4.2 FSI, Audi A8, Audi A8 4.2L
4H0907560F1037539898Audi pcmflash, Audi A8 4.2L
4H0907560F10SW010407Audi A8 4.2L

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page