Original file

Audi R8 Bosch MED17.1.1 4S0907552AC / 4S0907552R

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi R8, hardware number 4S0907552AC and software number 4S0907552R, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R85.2 petrol 540PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4S0907552AC
Software number
4S0907552R
Bosch part / software
10SW040568

Technical data

Vehicle
BrandAudi
Car modelR8
Engine5.2 petrol 540PS
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4S0907552AC
Software number4S0907552R
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key79a8d612e5c0cfba
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW040568Offset in the file: 0x02001A
Vehicle maker's hardware number4S0907552ROffset in the file: 0x3CC77E
Software / calibration4S0907552AC · version 0001Offset in the file: 0x3CC798
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8A6
Bosch project identifier (EPK)37/1/MED17/5///D1711A11A000_MY19B5///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4S0907552AC and software number 4S0907552R. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4H0907560F1037525746Audi A8 4.2 FSI, Audi A8, Audi A8 4.2L
4H0907560F1037539898Audi pcmflash, Audi A8 4.2L
4H0907560F10SW010407Audi A8 4.2L
4S0907552AB10SW040552Audi R8
4S0907552AE10SW034084Audi R8
4S0907552AK10SW061942Audi R8
4S0907552AL10SW061943Audi R8
4S0907552AL4S0907552ALAudi R8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page