Original file

Audi R8 Bosch MED17.1.1 4S0907552AN / 10SW057544

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi R8, hardware number 4S0907552AN and software number 10SW057544, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R85.2 petrol 540PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4S0907552AN
Software number
10SW057544
Vehicle maker's hardware number
4S0907552R

Technical data

Vehicle
BrandAudi
Car modelR8
Engine5.2 petrol 540PS
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4S0907552AN
Software number10SW057544
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key87938d58a85d8112
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW057544Offset in the file: 0x02001A
Vehicle maker's hardware number4S0907552ROffset in the file: 0x3CCA4A
Software / calibration4S0907552AN · version 0001Offset in the file: 0x3CCA64
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8A6
Bosch project identifier (EPK)37/1/MED17/5///D1711A11A000_MY20C5///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4S0907552AN and software number 10SW057544. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4S0907552AK10SW061942Audi R8
4S0907552AL10SW061943Audi R8
4S0907552AL4S0907552ALAudi R8
4S0907552AM10SW057543Audi R8
4S0907552BJ4S0907552RAudi R8
4S0907552CB4S0907552RAudi R8
4S0907552R042593Audi R8 5.2 FSI
4S0907552R046544Audi R8 5.2 FSI, Audi R8 5.2 FSI Quattro Plus - 611hp

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page