Original file

Audi R8 5.2 FSI Bosch MED17.1.1 4T0907552A / 010097

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi R8 5.2 FSI, hardware number 4T0907552A and software number 010097, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R8 5.2 FSI5.2 petrol 610.5PS / 449.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4T0907552A
Software number
010097
Bosch part / software
10SW010097
Software / calibration
4S0907552L

Technical data

Vehicle
BrandAudi
Car modelR8 5.2 FSI
Engine5.2 petrol 610.5PS / 449.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4T0907552A
Software number010097
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key248a9cdf09623cd8
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW010097Offset in the file: 0x38001A
Vehicle maker's hardware number4T0907552AOffset in the file: 0x3CA306
Software / calibration4S0907552L · version 0003Offset in the file: 0x3CA320
Bosch project identifier (EPK)41/1/MED17/5///D1711A11A000_MY16B9_010///Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4T0907552A and software number 010097. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi R8 5.2 FSIFlash4,096.00 KB€15Add to cart

All reads of 4T0907552A / 010097

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4S0907552R6576546454Audi R8
4T09075521037535700Lamborghini
4T0907552A003909Audi R8 5.2 FSI Quattro - 540hp
4T0907552A008834Audi R8 5.2 V10 FSI
4T0907552A018630Audi R8 5.2 FSI
4T0907552A077827Audi R8 5.2 FSI
4T0907552A1037001408Lamborghini Huracan 5.2LP 610
4T0907552A1037538589Audi R8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page