Original file

Audi R8 5.2 FSI Bosch MED17.1.1 4T0907552A / 077827

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi R8 5.2 FSI, hardware number 4T0907552A and software number 077827, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R8 5.2 FSI5.2 petrol 549.3PS / 404.0kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4T0907552A
Software number
077827
Bosch part / software
10SW077827
Software / calibration
4S0997552

Technical data

Vehicle
BrandAudi
Car modelR8 5.2 FSI
Engine5.2 petrol 549.3PS / 404.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4T0907552A
Software number077827
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyf034e119ac09e7d9
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW077827Offset in the file: 0x02001A
Vehicle maker's hardware number4T0907552AOffset in the file: 0x3CCD3A
Software / calibration4S0997552 · version 1001Offset in the file: 0x3CCD54
Internal build stringMED17 CB.06.02.02Offset in the file: 0x00E8FE
Bosch project identifier (EPK)38/1/MED17/5///D1711A11A000_MY20C21///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4T0907552A and software number 077827. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4T0907552A003909Audi R8 5.2 FSI Quattro - 540hp
4T0907552A008834Audi R8 5.2 V10 FSI
4T0907552A010097Audi R8 5.2 FSI
4T0907552A018630Audi R8 5.2 FSI
4T0907552A1037001408Lamborghini Huracan 5.2LP 610
4T0907552A1037538589Audi R8
4T0907552A1037542642Lamborghini Huracan
4T0907552A1037543870Lamborghini

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page