Original file

Audi R8 Bosch MED17.1.1 4T0907552A / 10SW008834

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi R8, hardware number 4T0907552A and software number 10SW008834, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R85.2 petrol 610PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4T0907552A
Software number
10SW008834
Software / calibration
4S0907552B

Technical data

Vehicle
BrandAudi
Car modelR8
Engine5.2 petrol 610PS
Power610.5PS / 449.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4T0907552A
Software number10SW008834
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6ead8a0d041a6b5d
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW008834Offset in the file: 0x02001A
Vehicle maker's hardware number4T0907552AOffset in the file: 0x3CA306
Software / calibration4S0907552B · version 0005Offset in the file: 0x3CA320
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8A6
Bosch project identifier (EPK)37/1/MED17/5///D1711A11A000_MY16B9///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4T0907552A and software number 10SW008834. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi R8 DKR & BR PERFORMANCEFlash4,096.00 KB€15Add to cart

All reads of 4T0907552A / 10SW008834

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4T0907552A10SW001399Lamborghini
4T0907552A10SW001411Lamborghini Huracan
4T0907552A10SW003907Audi R8
4T0907552A10SW003909Audi R8
4T0907552A10SW008865Audi R8
4T0907552A10SW010987Lamborghini Huracan, Lamborghini Huracane, Lamborghini Hurracane
4T0907552A10SW010988Lamborghini Huracan, Lamborghini Huracán
4T0907552A10SW018626Audi R8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page