Original file

Audi R8 plus Bosch MED17.1.1 4T0907552A / 10SW025028

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi R8 plus, hardware number 4T0907552A and software number 10SW025028, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R8 plus5.2 petrol 610PS
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
4T0907552A
Software number
10SW025028
Software / calibration
4S0907552M

Technical data

Vehicle
BrandAudi
Car modelR8 plus
Engine5.2 petrol 610PS
Power610.0PS / 448.7kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4T0907552A
Software number10SW025028
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya60335b4e4689a3c
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW025028Offset in the file: 0x02001A
Vehicle maker's hardware number4T0907552AOffset in the file: 0x1CB906
Software / calibration4S0907552M · version 0002Offset in the file: 0x1CB920
Bosch project identifier (EPK)37/1/MED17/5///D1711A11A000_MY18A8///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4T0907552A and software number 10SW025028. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4T0907552A10SW018630Audi R8 Plus
4T0907552A10SW023147Lamborghini Huracan Performante
4T0907552A10SW023450Lamborghini Huracan
4T0907552A10SW023451Lamborghini Huracan
4T0907552A10SW025029Lamborghini
4T0907552A10SW035320Lamborghini Huracan
4T0907552A10SW045905Lamborghini Huracan
4T0907552A4S0907552Audi R8

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page