Original file

Lamborghini Huracan Performante Bosch MED17.1.1 4T0907552A / 4T0907552G

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Lamborghini Huracan Performante, hardware number 4T0907552A and software number 4T0907552G, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Lamborghini Huracan Performante5.2 · 640.0PS / 470.7kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4T0907552A
Software number
4T0907552G
Bosch part / software
10SW035320

Technical data

Vehicle
BrandLamborghini
Car modelHuracan Performante
Engine5.2
FuelPetrol
Power640.0PS / 470.7kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4T0907552A
Software number4T0907552G
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfd31f061a207874b
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW035320Offset in the file: 0x38001A
Vehicle maker's hardware number4T0907552AOffset in the file: 0x3CB906
Software / calibration4T0907552G · version 0005Offset in the file: 0x3CB920
Bosch project identifier (EPK)38/1/MED17/5///D1711A11A000_MY18A10///Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4T0907552A and software number 4T0907552G. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4T0907552A4S0907552KAudi R8
4T0907552A4T0907552Lamborghini Huracan
4T0907552A4T0907552AAudi R8, Audi Huracan, Audi Huracan Performante
4T0907552A4T0907552DLamborghini Huracan
4T0907552AB10SW057541Lamborghini Huracan
4T0907552AB10SW065258Lamborghini Huracan
4W0906560A1037534185Bentley Continental
4W0906560A1037539396Bentley

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page