Original file

Bentley Bosch MED17.1.1 4W0906560G / 10SW009189

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Bentley, hardware number 4W0906560G and software number 10SW009189, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley4.0
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4W0906560G
Software number
10SW009189
Vehicle maker's hardware number
079907309

Technical data

Vehicle
BrandBentley
Car modelBentley
Engine4.0
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number4W0906560G
Software number10SW009189
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key615428876364a624
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW009189Offset in the file: 0x02001A
Vehicle maker's hardware number079907309Offset in the file: 0x3EF10C
Software / calibration4W0906560G · version 0001Offset in the file: 0x3EF126
Internal build stringMED17 CB.07.08.00Offset in the file: 0x00F286
Bosch project identifier (EPK)51/1/MED17/5/MED17.1.1//D1711A09C000_MY17A0/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4W0906560G and software number 10SW009189. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4W0906560C1037545592Bentley Continental 4.0 GTC V8, Bentley Continental GT, Bentley Continental GT 4.0L
4W0906560D1037545588Bentley
4W0906560E1037554606Bentley Continental, Bentley Continental GT 4.0L
4W0906560F1037554607Bentley Continental GT, Bentley
4W0906560H10SW009212Bentley
6D39060D93B1037518293Mercedes-Benz SLK350, Mercedes-Benz C
7P0907560B1037516979Volkswagen pcmflash
7P0907560C1037531308Volkswagen pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page