Original file

Audi A4 2.0TFSI Bosch MED17.1.1 8R0907115G / 1037520874

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi A4 2.0TFSI, hardware number 8R0907115G and software number 1037520874, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 2.0TFSI2.0 petrol
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
8R0907115G
Software number
1037520874
Software / calibration
8R0907115N

Technical data

Vehicle
BrandAudi
Car modelA4 2.0TFSI
Engine2.0 petrol
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number8R0907115G
Software number1037520874
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A4
File keyf68406bbbaa2cb0c
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
Bosch part / software1037520874Offset in the file: 0x02001A
Vehicle maker's hardware number8R0907115GOffset in the file: 0x3DEBE8
Software / calibration8R0907115N · version 0004Offset in the file: 0x3DEC02
Internal build stringMED17 CB.06.01.04Offset in the file: 0x00E84A
Bosch project identifier (EPK)52/1/MED17/5/MED17.1.1//D1711A08C000_NY12K32/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8R0907115G and software number 1037520874. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
4W0906560H10SW009212Bentley
6D39060D93B1037518293Mercedes-Benz SLK350, Mercedes-Benz C
7P0907560B1037516979Volkswagen pcmflash
7P0907560C1037531308Volkswagen pcmflash
8R0907115G1037523880Audi A6, Audi A6 2.0 TSI/TFSI, Volkswagen
8R0907115G1037523882Audi Q5 Hybrid 2.0 TFSI
8R0907115G1037524908Audi A4 2.0TFSI
8R0907115G1037526518Audi Q5 2.0 TSI/TFSI, Audi Q5

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page