Original file

Audi Q5 2.0 TFSI Hybrid Bosch MED17.1.1 8R0907115G / 1037532904

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi Q5 2.0 TFSI Hybrid, hardware number 8R0907115G and software number 1037532904, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 2.0 TFSI Hybrid2.0 petrol 210.7PS / 155.0kW
Control unit
Bosch MED17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
8R0907115G
Software number
1037532904
Software / calibration
8R1907115K

Technical data

Vehicle
BrandAudi
Car modelQ5 2.0 TFSI Hybrid
Engine2.0 petrol 210.7PS / 155.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number8R0907115G
Software number1037532904
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3625e1d433f9e0f7
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037532904Offset in the file: 0x02001A
Vehicle maker's hardware number8R0907115GOffset in the file: 0x3E4316
Software / calibration8R1907115K · version 0001Offset in the file: 0x3E4330
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)52/1/MED17/5/MED17.1.1//D1711A08C000_NY13P40/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8R0907115G and software number 1037532904. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
8R0907115G1037523882Audi Q5 Hybrid 2.0 TFSI
8R0907115G1037524908Audi A4 2.0TFSI
8R0907115G1037526518Audi Q5 2.0 TSI/TFSI, Audi Q5
8R0907115G1037528733Audi A6
8R0907115G1037532906Audi A6
8R0907115G1037550165Audi Q5
8R0907115G1037551319Audi Q5 2.0TFSI
8R0907115G10SW008940Audi Q5 2.0TFSI

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page