Original file

Audi pcmflash Bosch MED17.1.1 8R0907115N / 1037523882

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi pcmflash, hardware number 8R0907115N and software number 1037523882, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 petrol · 210.7PS / 155.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8R0907115N
Software number
1037523882
Vehicle maker's hardware number
8R0907115G

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 petrol
Power210.7PS / 155.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number8R0907115N
Software number1037523882
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2bb865fb94625110
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software1037523882Offset in the file: 0x02001A
Vehicle maker's hardware number8R0907115GOffset in the file: 0x3DEF70
Software / calibration8R0907115N · version 0005Offset in the file: 0x3DEF8A
Bosch project identifier (EPK)52/1/MED17/5/MED17.1.1//D1711A08C000_NY12K43/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8R0907115N and software number 1037523882. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
8R0907115G1037551319Audi Q5 2.0TFSI
8R0907115G10SW008940Audi Q5 2.0TFSI
8R0907115G10SW009086Audi Q5 2.0TFSI
8R0907115N1037520874Audi pcmflash
8R0907115N1037550165Audi pcmflash
8R1907115C1037526518Audi pcmflash
8R1907115M1037551319Audi pcmflash
8R1907115M10SW009086Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page