Original file

Audi RS5 Bosch MED17.1.1 8T1907560D / 10SW006202

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi RS5, hardware number 8T1907560D and software number 10SW006202, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS54.2 petrol 450PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8T1907560D
Software number
10SW006202
Vehicle maker's hardware number
8T1907560

Technical data

Vehicle
BrandAudi
Car modelRS5
Engine4.2 petrol 450PS
Power450.0PS / 331.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number8T1907560D
Software number10SW006202
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycef3ee7707c92fdf
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW006202Offset in the file: 0x08001A
Vehicle maker's hardware number8T1907560Offset in the file: 0x068D9E
Software / calibration8T1907560D · version 0008Offset in the file: 0x068DB8
Internal build stringMED17 CB.03.09.03Offset in the file: 0x00DBF7
Bosch project identifier (EPK)46/1/MED17/5/MED17.1.1//D171156L_M14T7/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8T1907560D and software number 10SW006202. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi pcmflashFlash2,048.00 KB€15Add to cart

All reads of 8T1907560D / 10SW006202

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
8T1907560D1037509104Audi RS5
8T1907560D1037514335Audi RS5, Audi RS5 4.2 FSI, Audi RS5 4.2 FSI V8
8T1907560D1037518960Audi RS5
8T1907560D1037523122Audi RS5, Audi RS5 4.2 FSI V8, Audi B8 4.2 FSI
8T1907560D8T1907560Audi RS5, Audi B8
8T1907560E1037519185Audi pcmflash, Audi RS5
8T1907560E10SW006204Audi pcmflash, Audi RS5
8T29075601037531220Audi RS4 4.2 FSI, Audi pcmflash

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page