Original file

Audi RS4 Bosch MED17.1.1 8T2907560E / 1037523849

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi RS4, hardware number 8T2907560E and software number 1037523849, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS44.2 petrol 450PS
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8T2907560E
Software number
1037523849
Bosch part / software
10SW004335
Vehicle maker's hardware number
8T1907560

Technical data

Vehicle
BrandAudi
Car modelRS4
Engine4.2 petrol 450PS
Power450.0PS / 331.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number8T2907560E
Software number1037523849
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6bf9f7937b13ec60
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
ProcessorTC1796
Bosch part / software10SW004335Offset in the file: 0x08001A
Vehicle maker's hardware number8T1907560Offset in the file: 0x070FDE
Software / calibration8T2907560E · version 0005Offset in the file: 0x070FF8
Internal build stringMED17 CB.03.09.03Offset in the file: 0x00DBF7
Bosch project identifier (EPK)47/1/MED17/5/MED17.1.1//D171156L_MY14B5/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8T2907560E and software number 1037523849. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
8T1907560E1037519185Audi pcmflash, Audi RS5
8T1907560E10SW006204Audi pcmflash, Audi RS5
8T29075601037531220Audi RS4 4.2 FSI, Audi pcmflash
8T2907560B1037531217Audi RS5, Audi pcmflash, Audi RS4
8T2907560E1037534274Audi RS4, Audi RS5, Audi RS4 4.2 V8 FSI
8T2907560E10SW001141Audi pcmflash, Audi RS5
8T2907560E10SW004335Audi pcmflash, Audi RS4
8T2907560E8T2907560EAudi RS4

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page