Original file

Audi pcmflash Bosch MED17.1.1 8V0907404 / 07K907309C

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi pcmflash, hardware number 8V0907404 and software number 07K907309C, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflashpetrol · 367.1PS / 270.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8V0907404
Software number
07K907309C
Bosch part / software
10SW003879

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Enginepetrol
Displacement2.5
Power367.1PS / 270.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number8V0907404
Software number07K907309C
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key57871da859809512
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW003879Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309COffset in the file: 0x3B6AA2
Software / calibration8V0907404 · version 0003Offset in the file: 0x3B6ABC
Bosch project identifier (EPK)37/1/MED17/5///D1711A13C000_MY15H0///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8V0907404 and software number 07K907309C. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
8T2907560F10SW004336Audi RS5, Audi pcmflash
8U0907404B10SW003874Audi pcmflash
8U0907404B10SW016370Audi pcmflash
8U0907404C10SW016375Audi pcmflash
8V090740410SW008134Audi pcmflash
9916186030210SW042648Porsche 911 GT3
9916186030299161869016Porsche 911 GT3
991618657081037545018Porsche 991 GT3

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page