Original file

Audi pcmflash Bosch MED17.1.1 8V0907404 / 10SW008134

An original (stock) flash read of the Bosch MED17.1.1 control unit, fitted in Audi pcmflash, hardware number 8V0907404 and software number 10SW008134, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflashpetrol · 367.1PS / 270.0kW
Control unit
Bosch MED17.1.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8V0907404
Software number
10SW008134
Vehicle maker's hardware number
07K907309C

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Enginepetrol
Displacement2.5
Power367.1PS / 270.0kW
Control unit
Control unitBosch MED17.1.1
ECU makerBosch
Hardware number8V0907404
Software number10SW008134
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfd855fe7f0a4d270
Identification read from the file
ECU nameMED17.1.1
Read typeFull read (boot area included)
Bosch part / software10SW008134Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309COffset in the file: 0x3B6AA2
Software / calibration8V0907404 · version 0005Offset in the file: 0x3B6ABC
Bosch project identifier (EPK)37/1/MED17/5///D1711A13C000_MY15H1///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8V0907404 and software number 10SW008134. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.1

HardwareSoftwareVehicles
8U0907404B10SW003874Audi pcmflash
8U0907404B10SW016370Audi pcmflash
8U0907404C10SW016375Audi pcmflash
8V090740407K907309CAudi pcmflash
9916186030210SW042648Porsche 911 GT3
9916186030299161869016Porsche 911 GT3
991618657081037545018Porsche 991 GT3
991618658081037545001Porsche 991 GT3, Porsche 991

Bosch MED17.1.1 original files

The Bosch MED17.1.1 unit page