Original file

Porsche 991 GT3 RS Bosch MED17.1.11 1037532253

An original (stock) flash read of the Bosch MED17.1.11 control unit, fitted in Porsche 991 GT3 RS, software number 1037532253, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche 991 GT3 RS4.0 petrol 500PS
Control unit
Bosch MED17.1.11
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
1037532253
Bosch part / software
10SW006188

Technical data

Vehicle
BrandPorsche
Car model991 GT3 RS
Engine4.0 petrol 500PS
Power500.0PS / 367.7kW
Control unit
Control unitBosch MED17.1.11
ECU makerBosch
Software number1037532253
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key166351b31e6c57af
Identification read from the file
ECU nameMED17.1.11
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW006188Offset in the file: 0x02001A
Internal build stringMED17 CB.02.01.03Offset in the file: 0x00E1E2
Bosch project identifier (EPK)51/1/MED17/4/D17111P01C000//D17111P01C000_NY16A1///Offset in the file: 0x37FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037532253. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.11

HardwareSoftwareVehicles
Porsche 991 GT3Porsche 991 GT3
1037544999Porsche
1037555025Porsche 991 GT3 RS 4.0
1037555245Porsche 911 GT3 RS
10SW006163Porsche 911
10SW009476Porsche 991 GT3, Porsche 911
10SW009478Porsche 911 GT3
10SW022688Porsche 911 GT3

Bosch MED17.1.11 original files

The Bosch MED17.1.11 unit page