Original file

Porsche 911 Bosch MED17.1.11 10SW030461

An original (stock) flash read of the Bosch MED17.1.11 control unit, fitted in Porsche 911, software number 10SW030461, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche 9114.0 petrol 520PS
Control unit
Bosch MED17.1.11
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW030461

Technical data

Vehicle
BrandPorsche
Car model911
Engine4.0 petrol 520PS
Power520.0PS / 382.5kW
Control unit
Control unitBosch MED17.1.11
ECU makerBosch
Software number10SW030461
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6b30c05d92a928c7
Identification read from the file
ECU nameMED17.1.11
Read typeFull read (boot area included)
Bosch part / software10SW030461Offset in the file: 0x02001A
Internal build stringMED17 CB.02.01.04Offset in the file: 0x00E232
Bosch project identifier (EPK)51/1/MED17/4/D17111P01C000//D17111P13C000_NY19B6///Offset in the file: 0x37FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW030461. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.11

HardwareSoftwareVehicles
10SW006163Porsche 911
10SW009476Porsche 991 GT3, Porsche 911
10SW009478Porsche 911 GT3
10SW022688Porsche 911 GT3
99161865611Porsche 991 GT3
00305175781037532253Porsche 911 GT3 RS 4.0
991618603001037547531Porsche 991 GT3
991618603001037555241Porsche 911 GT3 RS

Bosch MED17.1.11 original files

The Bosch MED17.1.11 unit page