Original file

Volkswagen Polo Bosch MED17.1.2 04C907309BC / 04C907309BC

An original (stock) flash read of the Bosch MED17.1.2 control unit, fitted in Volkswagen Polo, hardware number 04C907309BC and software number 04C907309BC, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.0
Control unit
Bosch MED17.1.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BC
Software number
04C907309BC
Bosch part / software
10SW030156
Software / calibration
04C906025A

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.0
FuelDiesel
Control unit
Control unitBosch MED17.1.2
ECU makerBosch
Hardware number04C907309BC
Software number04C907309BC
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key43a705a3843c0190
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW030156Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BCOffset in the file: 0x3C7C46
Software / calibration04C906025A · version 5806Offset in the file: 0x3C7C60
Bosch project identifier (EPK)38/1/MED17/3///D17127V39C001_M33P72///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BC and software number 04C907309BC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.2

HardwareSoftwareVehicles
04E907309CG10SW052185Audi A3 Hybride
04E907309DB04E907309DBVolkswagen Golf, Volkswagen Sagitar
04E907309DB10SW040122Volkswagen Golf
04E907309DS048616Audi Q3 1.4 TSI
04E907309EN10SW062517Volkswagen Jetta, Volkswagen Sagitar

Bosch MED17.1.2 original files