Original file

Volkswagen Golf Bosch MED17.1.2 04E907309DB / 10SW040122

An original (stock) flash read of the Bosch MED17.1.2 control unit, fitted in Volkswagen Golf, hardware number 04E907309DB and software number 10SW040122, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Golf1.4 petrol 150PS
Control unit
Bosch MED17.1.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309DB
Software number
10SW040122
Software / calibration
04E906025G

Technical data

Vehicle
BrandVolkswagen
Car modelGolf
Engine1.4 petrol 150PS
Power150PS / 110.3kW
Control unit
Control unitBosch MED17.1.2
ECU makerBosch
Hardware number04E907309DB
Software number10SW040122
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye87e4e7f8103bba8
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW040122Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309DBOffset in the file: 0x3D670E
Software / calibration04E906025G · version 6528Offset in the file: 0x3D6728
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V13C001_M19B47///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309DB and software number 10SW040122. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.2

HardwareSoftwareVehicles
04C907309BC04C907309BCVolkswagen Polo
04E907309CG10SW052185Audi A3 Hybride
04E907309DB04E907309DBVolkswagen Golf, Volkswagen Sagitar
04E907309DS048616Audi Q3 1.4 TSI
04E907309EN10SW062517Volkswagen Jetta, Volkswagen Sagitar

Bosch MED17.1.2 original files