Original file

Volkswagen Jetta Bosch MED17.1.21 04E907309AM / 10SW003873

An original (stock) flash read of the Bosch MED17.1.21 control unit, fitted in Volkswagen Jetta, hardware number 04E907309AM and software number 10SW003873, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Jetta1.4 petrol 149PS
Control unit
Bosch MED17.1.21
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309AM
Software number
10SW003873
Software / calibration
04E906023L

Technical data

Vehicle
BrandVolkswagen
Car modelJetta
Engine1.4 petrol 149PS
Power149.6PS / 110.0kW
Control unit
Control unitBosch MED17.1.21
ECU makerBosch
Hardware number04E907309AM
Software number10SW003873
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyeff400a095e19e9a
Identification read from the file
ECU nameMED17.1.21
Read typeFull read (boot area included)
Bosch part / software10SW003873Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309AMOffset in the file: 0x3C6C40
Software / calibration04E906023L · version 8492Offset in the file: 0x3C6C5A
Internal build stringMED17 CB.04.05.00Offset in the file: 0x00F630
Bosch project identifier (EPK)38/1/MED17/3///D17121V02C000_NY15G5///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309AM and software number 10SW003873. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.21

HardwareSoftwareVehicles
04E906023S04E906023SVolkswagen pcmflash
04E907309AM003873Volkswagen Jetta 1.4 TSI
04E907309AM1037536454Volkswagen Jetta
04E907309AM10SW000591Volkswagen
04E907309AP007491Volkswagen Jetta 1.4 TSI
04E907309AP04E907309APVolkswagen
04E907309AP1037546974Volkswagen Jetta
04E907309AP10SW003402Volkswagen

Bosch MED17.1.21 original files

The Bosch MED17.1.21 unit page