Original file

Volkswagen UP! Bosch MED17.1.27 0285950000 / 10SW028595

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Volkswagen UP!, hardware number 0285950000 and software number 10SW028595, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen UP!1.0 petrol 115PS
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0285950000
Software number
10SW028595
Vehicle maker's hardware number
04C907309BA
Software / calibration
04C906025F

Technical data

Vehicle
BrandVolkswagen
Car modelUP!
Engine1.0 petrol 115PS
Power115.6PS / 85.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number0285950000
Software number10SW028595
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye1efe0559b109416
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW028595Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309BAOffset in the file: 0x3C444A
Software / calibration04C906025F · version 5543Offset in the file: 0x3C4464
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V32C001_M33Q31///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0285950000 and software number 10SW028595. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen UP!Flash4,096.00 KB€15Add to cart

All reads of 0285950000 / 10SW028595

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
028595000004C906025FVolkswagen UP!
028595000004C907309BAVolkswagen UP!
04C907309BA04C906025FVolkswagen UP!
04C907309BA04C907309BAVolkswagen UP!
04C907309BA10SW037540Volkswagen UP!, Volkswagen up gti
04C907309BB011070Audi A1 1.0 TFSI
04C907309BB025030Seat Ibiza 1.0 TSI, Seat Polo 1.0 TSI, Volkswagen
04C907309BB035059Audi A1 1.0 TSI, Audi Ibiza 1.0 TSI, Seat

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page