Original file

Seat Ibiza 1.0 TSI Bosch MED17.1.27 04C907309BB / 025030

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Seat Ibiza 1.0 TSI, hardware number 04C907309BB and software number 025030, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Ibiza 1.0 TSI1.0 petrol 115.6PS / 85.0kW
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BB
Software number
025030
Bosch part / software
10SW025030
Software / calibration
04C906025H

Technical data

Vehicle
BrandSeat
Car modelIbiza 1.0 TSI
Engine1.0 petrol 115.6PS / 85.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BB
Software number025030
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key55b5943c7f1208a5
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW025030Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BBOffset in the file: 0x3BF94E
Software / calibration04C906025H · version 5177Offset in the file: 0x3BF968
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33P62///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BB and software number 025030. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat Ibiza 1.0 TSIFlash4,352.00 KB€15Add to cart
Volkswagen Polo 1.0 TSIFlash4,096.00 KB€15Add to cart

All reads of 04C907309BB / 025030

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BA04C906025FVolkswagen UP!
04C907309BA04C907309BAVolkswagen UP!
04C907309BA10SW037540Volkswagen UP!, Volkswagen up gti
04C907309BB011070Audi A1 1.0 TFSI
04C907309BB035059Audi A1 1.0 TSI, Audi Ibiza 1.0 TSI, Seat
04C907309BB035060Seat Ibiza 1.0 TSI
04C907309BB035120Škoda Fabia 1.0 TSI, Škoda Rapid 1.0 TSI
04C907309BB035121Audi A1 1.0 TSI, Audi Q3 1.0 TSI/TFSI

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page