Original file

Volkswagen Polo 1.0 TSI Bosch MED17.1.27 04C907309BB / 04C906025B

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Volkswagen Polo 1.0 TSI, hardware number 04C907309BB and software number 04C906025B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo 1.0 TSI1.0 petrol 94.0PS / 69.1kW
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BB
Software number
04C906025B
Bosch part / software
10SW036073

Technical data

Vehicle
BrandVolkswagen
Car modelPolo 1.0 TSI
Engine1.0 petrol 94.0PS / 69.1kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BB
Software number04C906025B
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6e76a908573a8e76
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW036073Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309BBOffset in the file: 0x3C6B02
Software / calibration04C906025B · version 6249Offset in the file: 0x3C6B1C
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33Q51///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BB and software number 04C906025B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A1Flash2,048.00 KB€15Add to cart

All reads of 04C907309BB / 04C906025B

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BB035121Audi A1 1.0 TSI, Audi Q3 1.0 TSI/TFSI
04C907309BB035123Seat Arona 1.0 TSI
04C907309BB035690Audi A3 1.0 TSI
04C907309BB037658Volkswagen no Serie 1.0 TSI
04C907309BB04C906025BKŠkoda Yeti
04C907309BB04C906025KSeat Arosa
04C907309BB04C906025MVolkswagen Polo
04C907309BB04C907309BBVolkswagen Golf, Volkswagen Ibiza, Volkswagen A3

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page